MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
b. Install the flange with the flat end facing downward.
5. INSTALL SNAP RING
Check that the end gap of the snap ring is not aligned with one of the cutouts.
6. RECHECK PISTON STROKE OF DIRECT CLUTCH
a. Install the direct clutch on the oil pump.
b. Using a dial indicator (long type pick or SST), measure the direct clutch piston stroke applying and releasing the compressed air (4 - 8
kg/sq.cm, 57 - 114 psi, 392 - 785 kPa) as shown.
SST 09350-32014 (09351-32190)
Piston stroke:
A241L, A241E 1.11 - 1.47 mm (0.0437 - 0.0579 in.)
A243L 1.63 - 1.97 mm (0.0642 - 0.0776 in.)
A240L, A241H 1.36 - 1.71 mm (0.0535 - 0.0669 in.)