MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
b. Install the two retainers and snap rings to the both sides.
2. INSTALL PLANETARY GEAR INTO ONE-WAY CLUTCH
Install the planetary gear into the one-way clutch facing the inner race of the planetary gear toward the back side of the one-way clutch outer race.
3. CHECK OPERATION OF ONE-WAY CLUTCH
4. INSTALL THRUST WASHERS
a. Coat the two thrust washers with petroleum jelly.
b. Align the tab of the washers with the hollow of the carrier.
REPLACEMENT OF RING GEAR FLANGE