MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
5. INSTALL AND FINGER TIGHTEN BOLTS IN UPPER VALVE BODY
Install and finger tighten the eight bolts.
HINT: Each bolt length (mm) is indicated in the figure.
6. TIGHTEN BOLTS OF UPPER AND LOWER VALVE BODIES
a. Tighten the twenty-two bolts in the lower valve body.
(A240L, A241L, A243L)
Torque: 65 kg-cm (56 in.-lb, 6.4 N.m)
b. Tighten the nineteen bolts in the lower valve body.
(A241E)
Torque: 65 kg-cm (56 in.-lb, 6.4 N.m)