MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
Clutch Slave Cylinder: Service and Repair
Fig. 5 Exploded View Of Release Cylinder.
1.
Remove No. 1 engine undercover, Fig. 5, then disconnect transaxle control cables.
2.
Disconnect clutch line union using line wrench 09751-36011, or equivalent.
3.
Support engine and transmission with a jackstand and remove front engine mounting bracket set bolts.
4.
Remove bolt and pull out release cylinder assembly.
5.
Reverse procedure to install, ensure to bleed system.