MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
d. Quickly install the ring gear on the differential case. Install the sixteen bolts.
HINT: Align the matchmarks on the differential left case and contact the ring gear.
e. Tighten the set bolts uniformly and a little at a time. Torque the bolts.
Torque: 1,260 kg-cm (91 ft-lb, 124 N-m)
8. INSTALL SIDE BEARING
Using SST and a press, install the side bearings onto the differential case.
SST 09316-60010 (09316-00010)
HINT: Press the bearing on the ring gear side first.
9. ADJUST OUTPUT SHAFT ASSEMBLY PRELOAD
10. INSTALL DIFFERENTIAL CASE ASSEMBLY