MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
Shifter M/T: Service and Repair
Shift and Select Lever Assembly
Disassembly
1. REMOVE NO.2 SHIFT INNER LEVER
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Using two screwdrivers and a hammer, remove the snap ring.
c. Remove the No.2 select spring seat, No.2 compression spring and No.2 shift inner lever.
2. REMOVE SHIFT INTER PLATE AND NO.1 SHIFT INNER LEVER
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the shift inter plate and No.1 shift inner lever.