MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
/Page-64001.png)
Ignition Switch: Service and Repair
Fig. 4 Exploded View Of Steering Column & Ignition Switch Assembly
1.
On models with audio coded anti-theft system, disable system as outlined under Technician Safety Information.
2.
On models with airbag, disable airbag system as described under Technician Safety Information. On models less airbag, disconnect battery
ground cable.
3.
Remove steering wheel, if necessary, steering column garnish, if equipped, upper and lower covers, Fig. 4.
4.
Disconnect electrical connectors from ignition switch.
5.
Turn ignition key to ACC position and remove ignition key cylinder.
6.
Remove screw and ignition switch.
7.
Reverse procedure to install. Arm airbag system. On models with air bag system, rearm airbag system as outlined under Technician Safety
Information.
