MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
4. INSTALL ON-WAY CLUTCH AND SECOND BRAKE HUB ON SUN GEAR
While turning the hub clockwise, slide the one-way clutch onto the sun gear.
5. RECHECK OPERATION OF ONE-WAY CLUTCH.
INSPECTION OF FRONT PLANETARY GEAR
MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.
INSPECTION OF PLANETARY RING GEAR
1. INSPECT RING GEAR FLANGE BUSHING
Using a dial indicator, measure the inside diameter of the flange bushing.
Standard inside diameter: 19.025 - 19.050 mm (0.7490 - 0.7500 in.)
If the inside diameter is greater than maximum, replace the flange.