MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
1. POSITION PLATE AND NEW GASKETS ON LOWER VALVE BODY
Position the new No.2 gasket, the plate and then the new No.1 gasket on the lower valve body.
HINT: Since the No.1 gasket and No.2 gasket are similar use the illustration below to discriminate between them.
2. PLACE LOWER VALVE BODY WITH PLATE AND GASKETS ON UPPER VALVE BODY
HINT: Hold the lower valve body, gaskets and plate securely so they do not separate.
Align each bolt hole in the valve bodies with the gaskets and plate.
3. INSTALL AND FINGER TIGHTEN BOLTS IN LOWER VALVE BODY TO SECURE UPPER VALVE BODY
Install and finger tighten the nine bolts.
HINT: Each bolt length (mm) is indicated in the figure.
4. INSTALL LOWER VALVE BODY COVER