MR2 L4-1587cc 1.6L DOHC (4A-GE) (1986)
Constant Velocity Joint: Service and Repair
Overhaul
Fig. 7 Rear axle shaft exploded view. MR2
On models equipped with 4A-GE engine, proceed as follows:
1.
Inspect axle shaft as follows:
a. Ensure that there is no play in the inboard and outboard joint.
b. Ensure that inboard joint slides smoothly in thrust direction.
c. Ensure that there is not excessive play in the radial direction of the inboard joint.