MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
/Page-206001.png)
Timing Belt: Service and Repair
Timing Belt Removal
TIMING BELT COMPONENTS
REMOVAL OF TIMING BELT
1. Remove RH wheel.
2. Remove engine under cover.
3. Remove alternator drive belt.
4. Remove drive belt and water pump pulley.
(a) Loosen the four bolts mounting the pulley to the pulley seat of the water pump.
(b) Loosen the idler pulley lock nut and adjusting bolt, and remove the drive belt.
(c) Remove the four bolts and water pump pulley.
5. Remove spark plugs.
