MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
(a) Using SST 09213-70010 and 09330-00021 to hold the crankshaft pulley, loosen the pulley bolt.
(b) Remove SST and pulley bolt.
(c) Using SST 09213-31021, remove the crankshaft pulley.
9. Remove timing belt covers with gaskets.
Remove the ten bolts and timing belt covers with gaskets.
10. Remove timing belt guide.
11. Remove timing belt.
NOTE: If reusing the timing belt, draw a direction arrow on the belt (in direction of engine revolution) and place matchmarks on the pulleys and
belt as shown.