MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
c. Using a screwdriver and hammer, drive out the oil seal.
d. Using SST, brass bar and hammer, remove the taper roller bearing outer race.
SST 09612-65014
e. Using SST and a hammer, install the taper roller bearing.
SST 09316-60010 (09316-00010, 09316-00040)
f.
Using SST and a hammer, drive in a new oil seal.
SST 09316-60010 (09316-00010)
g. Coat the lip of oil seal with MP grease.