MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
a. Connect an ohmmeter between the terminals.
b. Bring a magnet close to then away from the sensor tip and check that the meter needle deflects from 0 ohm to infinity ohms.
INSTALLATION OF SPEED SENSOR
1. INSTALL AND COAT NEW O-RING WITH ATF
2. INSTALL SPEED SENSOR
3. INSTALL RETAINING PLATE
4. CONNECT SPEED SENSOR CONNECTOR
5. INSTALL AIR FLOW METER AND AIR CLEANER HOSE
6. (A241E/4A-GZE)
INSTALL INTERCOOLER
Connect the two hose clamps, and install the four bolts and intercooler.