MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
11. INSTALL PISTON IN CYLINDER
Using SST, slowly turn the piston clockwise until the piston turns freely, then align the cylinder protrusion and piston stopper groove.
SST 09719-14020 (09719-00020)
12. INSTALL CYLINDER BOOT AND SET RING IN CYLINDER
13. INSTALL MAIN PIN BOOT
a. Using SST and a hammer, tap in a new main pin boot to the caliper.
SST 09325-12010
b. Confirm that the metal plate portion of the main pin boot fits snugly in the caliper.
14. INSTALL DUST BOOT AND SLIDING BUSHING
a. Install the dust boot.
b. Install the bushing into the boot with the flange facing inside.