MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
b. Install the 2 spacers and 4 new insulators to the cylinder head.
c. Apply a light coat of spindle oil or gasoline on the place where a delivery pipe touches the O-ring.
d. While turning the injector clockwise and counterclockwise, push it to the delivery pipes. Then install the 4 injectors.
e. Position the injector connector upward.
f.
Attach the delivery pipe together with the 4 injectors to the cylinder head.
g. Temporarily install the 2 bolts to hold the delivery pipe to the cylinder head.
h. Check that the injectors rotate smoothly.
HINT: If injectors do not rotate smoothly, the possible cause is incorrect installation of the O-ring. Replace the O-ring.
i.
Position the injector connector upward.