Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Disconnect Brake Lines
Using Special Service Tool
(SST) # 09023 - 00100, disconnect the brake lines from the ABS Actuator.
Torque: 15 Nm (11 ft. lbs.)
3. Remove ABS Actuator assembly.
(a) Remove the RH front fender liner.
(b) Remove the 2 bolts, nut and ABS Actuator assembly.
Torque: 19 Nm (14 ft. lbs.)
4. Remove ABS Actuator.
(a) Remove the bolt and No.3 bracket from the ABS Actuator assembly.
Torque: 19 Nm (14 ft. lbs.)
(b) Remove the 3 nuts and Actuator from the bracket assembly.
Torque: 7.8 Nm (69 inch lbs.)
(c) Remove the 3 holders and cushions from the ABS Actuator.
INSTALLATION
Installation is in the reverse order of removal.
-
After installation, fill brake reservoir with brake fluid, bleed brake system. See: Brake Bleeding/Service and Repair
-
Check for leaks.
