Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Brake Shoe: Testing and Inspection
LINING THICKNESS
1. Using a ruler, measure the thickness of the shoe lining.
-
Standard thickness: 4.0 mm (0.157 inch)
-
Minimum thickness: 1.0 mm (0.039 inch)
2. If the shoe lining is less than the minimum or shows signs of uneven wear, replace the Brake Shoes.
NOTE: If a Brake Shoes needs replacing, the Brake Shoes must be replaced as a set.
PROPER CONTACT
Inspect rear brake lining and drum for proper contact.
Inspect Contact Between Brake Lining And Drum
-
If the contact between the brake lining and drum is improper, repair the lining with a Brake Shoe grinder, or replace the Brake Shoe assembly.