Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
(a)
After checking that there are no foreign objects in the lock plate groove, install the new O-ring without twisting it.
NOTE: When cleaning the lock plate groove, lightly rub it with sand paper without scratching it.
(b) Install the tank without damaging the O-ring.
(c)
Tap the lock plate with a soft-faced hammer so that there is no gap between it and the tank.
4. Assemble SST # 09230 - 01010 or equivalent.
(a)
Install the punch assembly to the overhaul handle, inserting it in the hole in part "A" as shown in the illustration.
(b) While gripping the handle, adjust the stopper bolt so that dimension "B" shown in the diagram is 7.7 mm (0.30 inch).
5. Caulk lock plate.