toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

No. 1 Cooling Fan Motor|Page 1647 > < Diagram Information and Instructions|Page 1644
Page 1
background image

Radiator Cooling Fan Motor: Testing and Inspection
No. 1 Cooling Fan Motor

INSPECTION

1. Inspect No. 1 cooling fan.

(a)

Disconnect the cooling fan connector.

(b) Connect battery and ammeter.
(c)

Check that the cooling fan rotates smoothly, and check the reading on the ammeter.
Standard amperage:

5.7 - 7.7 amps Manual Transaxle (M/T).
8.6 - 11.6 amps Automatic Transaxle (A/T)
.

(d) Reconnect the cooling fan connector.

No. 1 Cooling Fan Motor|Page 1647 > < Diagram Information and Instructions|Page 1644