Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Alignment: Service and Repair
Rear
1. Measure the vehicle height.
NOTE: Before inspecting the wheel alignment, adjust the vehicle height to the specification.
2. Inspect the camber.
The camber measurement should be -0°30' ± 45' (-0.5° ± 0.75°).
The Left-right error should be 45' (0.75°) or less.
NOTE: The camber is not adjustable, if the measurement is not within the specification, inspect and replace the suspension parts as necessary.
Measuring Point Reference
3. Inspect the toe-in. The toe-in (totals) are as follows.
A + B: 0°20' ± 20' (0.33° ± 0.33°)
C - D: 3.4 ± 3.4 mm (0.13 ± 0.13 inch).
NOTE: Toe-in is not adjustable, if the measurement is not within the specification, inspect and replace the suspension parts as necessary.
