Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
(a)
Align the pulley set key with the key groove of the pulley.
(b) Slide on the timing pulley, facing the rotor side of the crankshaft position sensor inward.
2. Temporarily install No. 1 idler pulley and tension spring.
(a)
Install the tension spring to the idler pulley.
(b) Align the bracket pin hole with the pivot pin.
(c)
Install the idler pulley with the bolt. Do not tighten the bolt yet.
(d) Pry the idler pulley toward the left as far as it will go and temporarily tighten the bolt.
(e)
Check that the idler pulley moves smoothly.
3. Install No. 2 idler pulley.
(a)
Install the idler pulley with the bolt.
Torque: 28 Nm (280 kg.cm, 20 ft. lbs.)
(b) Check that the idler pulley moves smoothly.
4. Install camshaft timing pulley.
(a)
Align the camshaft knock pin with the knock pin groove on the pulley side with the 5E mark, and slide on the timing pulley.
(b) Using SST, install the pulley bolt.
SST 09960 - 10010 (09962 - 01000, 09963 - 01000) or equivalent.
Torque: 51 Nm (510 kg.cm, 37 ft. lbs.)
