Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
^
Using a micrometer, measure the thickness the removed shim.
^
Calculate the thickness of a new shim so that the valve clearance comes within specified value.
T = Thickness of removed shim.
A = Measured valve clearance.
N = Thickness of new shim.
Intake: N = T + (A - 0.20 mm (0.008 inch))
Exhaust: N = T + (A - 0.36 mm (0.014 inch))
^
Select a new shim with a thickness as close as possible to the calculated value.
NOTE: Shims are available in 17 increments of 0.05 mm (0.0020 inch), from 2.50 mm (0.0984 inch) to 3.30 mm (0.1299 inch).
(c)
Install a new adjusting shim.
^
Place a new adjusting shim on the valve lifter.
^
Using SST (A), press down the valve lifter and remove SST (B).
(d) Recheck the valve clearance.
7. Reinstall cylinder head cover.
(a)
Apply seal packing to the cylinder head as shown in the illustration.
Seal packing: Part No. 08826 - 00080 or equivalent.
(b) Install the gasket to the cylinder head cover.
