Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
5. Pack the bearings with grease, taking care to do the following.
a. Place MP grease in the palm of your hand.
b. Pack grease into the bearing, continuing until the grease oozes out from the other side.
c. Do the same around the bearing circumference.
6. Install the oil seal, following these steps.
a. Pack the inside of the axle hub and grease cap with MP grease, as shown.
b. Install the inner bearing.
c. Using the 09550 - 10012 (09552 - 10010, 09557 - 10010) SST and a hammer, install a new oil seal.
d. Coat the oil seal lip with MP grease.
7. Install brake drum with axle hub.
