toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Inspection|Page 2929 > < Component Inspection
Page 2
background image

(d) Using an ohmmeter, measure the resistance between the terminals +B and HT.

Resistance: 11 - 16 ohms at 20°C (68°F) 

If the resistance is not as specified, replace the sensor.

Torque: 44 N.m (440 kgf.cm, 32 ft.lbf) 

(e) Reconnect the oxygen sensor connector.
(f) Reinstall the floor carpet.
(g) Reinstall the passenger's seat.

Component Inspection|Page 2929 > < Component Inspection