Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Vehicle Speed Sensor: Service and Repair
VEHICLE SPEED SENSOR NO.1 REPLACEMENT
To replace vehicle speed sensor no.1 the instument cluster must be removed SEE:Instrument Cluster/CarrierSee: Instrument Panel, Gauges and Warning
Indicators/Instrument Cluster / Carrier
Vehicle Speed Sensor NO.2
Vehicle Speed Sensor NO.2
1. Remove NO>2 vehicle speed sensor
(a) Disconnect the NO.2 vehicle speed sensor connector.
(b) Remove the bolt and locki8ng plate.
(c) Pull out the NO.2 vehicle speed sensor.
(d) Remove the 2 bolts and plate.
(e) Pull out the rotor.
2. Install the NO.2 vehicle speed sensor
(a) Install the rotor.
(b) Install the plate and rotor.
Torque: 5.4 Nm(55 kgf cm, 48 in lbf)
(c) Install the NO.2 vehicle speed sensor.
(d) Install the locking plate and bolt.
Torque: 5.4 Nm(55 kgf cm, 48 in lbf)
(e) Install the NO.2 vehicle speed sensor connector.
