Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
(1) Throttle position sensor connector and wire clamp
(2) IAC valve connector
(3) EVAP hoses
(b) Remove the 2 nuts and 2 bolts.
Torque: 19.5 N.m (195 kgf.cm, 14 ft.lbf)
(c) Disconnect the throttle body from the intake manifold.
(d) Remove the gasket.
INSTALLATION HINT: Attach a new gasket to the intake manifold. facing the protrusion downward.
(e) Disconnect these hoses from the throttle body. and remove the throttle body:
(1) Water bypass hose (from water bypass pipe)
(2) Water bypass hose (from water outlet)
(3) Air hoses (from PS air control valve)
THROTTLE BODY INSTALLATION
Installation is in the reverse order of removal.
