Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Camshaft Position Sensor: Component Tests and General Diagnostics
CAMSHAFT POSITION SENSOR INSPECTION
NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensor itself. "Cold" is from -10°C (14°F) to 50°C (122°
F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
1. Disconnect camshaft position sensor connector
2. Inspect camshaft position sensor resistance.
Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 985 - 1,600 ohms
Hot: 1,265 - 1,890 ohms
If the resistance is not as specified, replace the camshaft position sensor.
3. Reconnect camshaft position sensor connector.