Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Wheel Speed Sensor: Service and Repair
Rear
Rear Speed Sensor Components
REMOVAL
1. Disconnect the Speed Sensor connector.
(a) Remove the seat cushion.
Disconnect Speed Sensor Connector
(b) Disconnect the Speed Sensor connector, and pull out the sensor wire harness with the grommet.
(c) Remove the 3 clamp bolts holding the sensor wire harness to the suspension arm.
Torque: 5 Nm (44 inch lbs.)
2. Remove Speed Sensor.
Remove Speed Sensor From Axle Beam
Remove the Speed Sensor from the Axle beam.
Torque: 8 Nm (71 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, check Speed Sensor signal.