toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Rectifier Diode / Bridge, Alternator > < Alternator Brush|Type A|Page 4801
Page 1
background image

Discharge Warning Light: Testing and Inspection

CHARGE WARNING LIGHT

INSPECT CHARGE WARNING LIGHT CIRCUIT
1. Warm up the engine and then turn it off.
2. Turn off all accessories.
3. Turn the ignition switch "ON". Check that the charge warning light is lit.
4. Start the engine. Check that the light goes off.

If the light does not go off as specified, troubleshoot the charge light circuit.

Rectifier Diode / Bridge, Alternator > < Alternator Brush|Type A|Page 4801