Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
^
Adjusting value for the set bolts is 0.1° - 0.5°.If the camber is not within the specification, using the table, estimate of how much additional
camber adjustment will be required, and select the camber adjusting bolt.
^
Tighten the adjusting bolt with a washer for the bolt side and for the nut side.
i.
Do the above mention steps again. Between the step (b) and (c), exchange (1) or (2) selected bolts.
NOTE: When exchange two bolts, exchange one bolt for each time.
6. Adjust the toe-in, doing the following.
a. Remove the boot clamps.
b. Loosen the tie rod end lock nuts.
c. Turn the left and right rack ends an equal amount to adjust the toe-in.
NOTE:
^
Try to adjust the toe-in to the center value.
