Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Rotor And Cam Ring Mark: 1
Vane Plate Part Number: 44345 - 26020
Vane Plate Length: 14.997 - 14.999 mm (0.59043-0.59051 inch).
Rotor And Cam Ring Mark: 2
Vane Plate Part Number: 44345 - 26030
Vane Plate Length: 14.995- 14.997 mm (0.59035 -0.59043 inch).
Rotor And Cam Ring Mark: 3
Vane Plate Part Number: 44345 - 26040
Vane Plate Length: 14.993 - 14.995 mm (0.59027 -0.59035 inch).
Rotor And Cam Ring Mark: 4
Vane Plate Part Number: 44345-26050
Vane Plate Length: 14.991 - 14.993 mm (0.59020 -0.59027 inch).
3. Inspect the flow control valve by doing these procedures.
a. Coat the valve with power steering fluid and check that it falls smoothly into the valve hole by its own weight.
b. Check the valve for leakage. Close one of the holes and apply 392 - 490 kPa (57 - 71 psi) of compressed air into the opposite side, and
confirm that air does not come out from the end holes.
NOTE: If necessary, replace the valve with one having the same letter as inscribed on the front housing. The inscribed marks are A, B. C, D, E
or F.
