toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 5070 > < Steering Gear|Removal and Installation|Page 5068
Page 3
background image

Power Steering Gear / 3 Of 3

1. Place the front wheels facing straight ahead.
2. If the vehicle has an airbag, remove the steering wheel pad.
3. If the vehicle has an airbag, remove the steering wheel.
4. Disconnect the right and left hand tie rod ends.
5. Remove the column hole cover after removing the two bolts and nut.
6. Disconnect the sliding yoke.
7. Remove the stabilizer bar. 
8. Remove the engine rear mount insulator after removing the six bolts.
9. Remove the engine rear mount bracket. For the manual transmission, remove the three bolts, and for the automatic transmission, remove the two

Steering Gear|Removal and Installation|Page 5070 > < Steering Gear|Removal and Installation|Page 5068