Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
bolts.
10. Disconnect the tube clamp after removing the bolt.
11. Disconnect the two vacuum hoses.
12. Using the 09631 - 22020 Special Service Tool (SST), disconnect the pressure feed and return tubes.
13. Remove the bolt and nut, then remove the two brackets and grommets.
14. Remove the power steering gear assembly by doing the following.
a. Slide the gear assembly to the left hand side of the vehicle.
b. Slide the gear assembly to the right hand side and pull it out.
NOTE: Do not damage the turn pressure tubes.
INSTALLATION
