toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering|Tie Rod > < Steering Wheel Nut - Torque Standardization|Page 5099
Page 1
background image

Steering Wheel: Testing and Inspection

INSPECTION 

Steering / Troubleshooting

FREE PLAY

With the vehicle stopped and tires pointed straight ahead, rock the steering wheel gently back and forth with light finger pressure. Freeplay should
not exceed the maximum of 30 mm (1.18 inch).

STEERING EFFORT 

1. Center the steering wheel.
2. Measure the steering effort by doing the following.

a. Remove the steering wheel pad.
b. Start the engine and run it at idle.
c. Measure the steering effort in both directions. The (reference) measurement is 7.8 Nm (69 inch lbs.).

NOTE: Be sure to consider the tire type. pressure and contact surface before making your diagnosis.

d. Tighten the steering wheel set nut to 34 Nm (25 ft. lbs.).
e. Install the steering wheel pad.

Steering|Tie Rod > < Steering Wheel Nut - Torque Standardization|Page 5099