Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
3. Disconnect the lower suspension arm from the lower ball joint after removing the two nuts and bolt.
NOTE: When installing the two nuts and bolt tighten them to 80 Nm (59 ft. lbs.).
4. Remove the lower suspension arm after removing the three bolts.
NOTE: After stabilizing the suspension, tighten bolt A to 142 Nm (105 ft. lbs.), and bolt B to 74 Nm (55 ft. lbs.).
5. Installation is in the reverse order of removal.
NOTE: After installation, check front wheel alignment.