Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Front Suspension / Stabilizer Bar
REPLACEMENT
1. Disconnect the stabilizer bar from the lower suspension arms by doing the following.
a. Holding the bolt, loosen the nut.
NOTE: When installing the bolt and nut, tighten to 18 Nm (13 ft. lbs.).
b. Holding the bolt, remove the nut, retainers and cushions.
NOTE: When installing the bolt and nut tighten them to 18 Nm (13 ft. lbs.).
2. Remove the two bushings and brackets from the stabilizer bar.