Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
ASSEMBLY
1. Using the 09727 - 30021 SST, compress the coil spring.
NOTE: Do not use an impact wrench, it will damage the SST.
2. Install the coil spring to the shock absorber, taking care to fit the lower end of the coil spring into the gap of the spring seat of shock absorber.
3. Install the spring bumper to the shock absorber piston rod.
Rear Suspension / Axle Beam And Lateral Control Rod
4. Align the suspension support with the shock absorber lower bracket, as shown and install it.
5. Install the washer.
6. Install a new nut and tighten it down to 34 Nm (25 ft. lbs.).
7. Remove the SST.
Disposal
