Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Seals and Gaskets: Service and Repair
DIFFERENTIAL OIL SEALS REPLACEMENT
1. Drain ATF.
2. Remove engine under cover.
3. Remove LH and RH drive shafts.
4. Remove side oil seal.
Using Special Service Tool (SST) 09308 - 00010 or equivalent, drive out the oil seals on both sides.
5. Install side oil seals.
Using SST 09350 - 32014 (09351 - 32130, 09351 - 32150) and a hammer, drive in a new oil seal until its surface is flush with the case surface.
Oil seal drive in depth:
-
LH side: 5.3 + 0.5 mm (0.209 + 0.020 in.)
-
RH side: 3.1 + 0.5 mm (0.122 + 0.020 in.)
b. Coat the oil seal lip with MP grease.
6. Install LH and RH drive shafts.
7. Install engine under cover.
8. Fill and check fluid level.