Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
b. Remove the gasket from the oil strainer.
NOTE: Replace the used gaskets with a new one.
5. Remove oil pipe bracket and oil pipe clamp.
a. Remove the 2 bolts and oil pipe bracket.
Torque: 10 Nm (100 kgf/cm, 7 ft.lbs.)
b. Remove the gasket from the oil strainer
Torque: 10 Nm (100 kgf/cm, 7 ft.lbs.)
6. Remove oil pipe.
Pry up the both pipe ends with a large screwdriver and remove the 5 pipes.
NOTE: Be careful not to bend or damage the pipe.
7. Disconnect 3 solenoid connectors.
8. Remove solenoid wire assembly clamp.
Remove the bolt and clamp.
Torque: 10 Nm (100 kgf/cm, 7 ft.lbs.)