Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Clutch Master Cylinder: Service and Repair
Replacement
MASTER CYLINDER REMOVAL
1. Draw out fluid with syringe.
2. Disconnect clutch line.
Using Special Service Tool (SST) 09023 - 00100 or equivalent, disconnect the line. Use a container to catch the fluid.
Torque: 15 Nm (155 kgf/cm, 11 ft.lbs.)
3. Remove clip and clevis pin.
4. Remove 2 mounting nuts and pull out master cylinder.
Torque: 12 Nm (120 kgf/cm, 9 ft.lbs.)
MASTER CYLINDER INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, bleed system and adjust clutch pedal.