Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Front Axle Hub And Steering Knuckle
DISASSEMBLY
1. Remove the lower ball joint after doing these procedures.
a. Remove the clip and nut.
b. Using the 09628 - 62011 Special Service Tool (SST), remove the lower ball joint.
2. Using a screwdriver, remove the inner oil seal.
3. Using a (T30) torx wrench , remove the three dust cover set bolts.
4. Remove the axle hub and dust cover by doing the following.
