Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Wheel Bearing: Service and Repair
Rear
Rear Axle Hub
REPLACEMENT
1. Remove brake drum with axle hub.
2. Remove the oil seal and the inner bearing by doing these procedures.
a. Using the 09308 - 00010 SST, remove the oil seal.
b. Remove the inner bearing.
3. Using a brass bar and hammer, remove the two outer races.
4. Using SST and a press, install two new bearing outer races.
^
For the inside use the 09950 - 60010 (09951 - 00460), 09950 - 70010 (09951 - 07150) Special Service Tool (SST).
^
For the outside, use the 09550 - 10012 (09552 - 10010, 09553 - 10010) SST.