Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
e. Using SST 09350 - 32014 (09351 - 32111, 09351 - 32130) and a hammer, drive in a new oil seal.
e. Drive in depth: 2.4 +/- 0.3 mm (0.094 +/- 0.012 in.)
f.
Coat the lip of the oil seal with MP grease.
6. If necessary, replace oil seal and side bearing outer race from transaxle case side.
a. Using a screwdriver and hammer, drive out the oil seal.
b. Using SST 09612 - 65014, pull out the outer race and plate washer.
c. Place the plate washer into the case.
d. Using SST 09950 - 60020 (09951 - 00680), 09950-70010 (09951 -07150) and a hammer, drive in a new outer race.
e. Using SST 09350 - 32014 (09351 - 32130, 09351 - 32150) and a hammer, drive in a new oil seal.
Drive in depth: 1.9 +/- 0.3 mm (0.075 +/- 0.012 in.)
f.
Coat the lip of the oil seal with MP grease.
DIFFERENTIAL CASE ASSEMBLY
