Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Wiper Motor: Testing and Inspection
INSPECT WIPER MOTOR OPERATION
Low Speed
Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead from the battery to terminal 1, and check that the motor operates at
low speed.
If operation is not as specified, replace the motor.
High Speed
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead from the battery to terminal 1, and check that the motor operates at
high speed.
If operation is not as specified, replace the motor.
Stopping at Stop Position
1. Operate the motor at low speed and stop the motor operation anywhere except at the stop position by disconnecting positive (+) lead from terminal
3.
2. Connect terminals 3 and 5.
3. Connect the positive (+) lead from the battery to terminal 6 and negative (-) lead from the battery terminal 1. and check that the motor stops
running at the stop position after the motor operates again.