Pickup 2WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1987)
/Page-887006.png)
housing.
7.
Install cross shaft into gear housing so that center teeth mesh, then torque end cover bolts to 29-39 ft. lbs. (4-5.5 kg-m).
8.
Rotate worm shaft to full lock position in both directions to determine exact center point. Rotate adjusting screw and adjust total preload to 5.2-8.2
inch lbs.
9.
Install new adjusting screw washer, then torque locknut to 29-39 ft. lbs. while holding adjusting screw.
10.
Stake locknut at three places.
Fig. 10 Exploded view of power steering gear. 1986-88 4WD Pickup, 4Runner & 1987-88 2WD Pickup
