Pickup 2WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1987)
Clutch Switch: Testing and Inspection
CHECK CLUTCH PEDAL
1. CHECK THAT PEDAL HEIGHT IS CORRECT
2. CHECK THAT PEDAL FREEPLAY AND PUSH ROD PLAY ARE CORRECT
CHECK CLUTCH START SYSTEM
CHECK CLUTCH START SYSTEM
(a) Check that the engine does not start when the clutch pedal is released.
(b) Check that the engine starts when the clutch pedal is fully depressed.
(c) Check that clearance "A" is greater than 1 mm (0.04 in.) when the clutch is fully depressed.
If necessary, adjust or replace the clutch start switch.
INSPECTION AND ADJUSTMENT OF CLUTCH START SWITCH
1. INSPECT CONTINUITY OF CLUTCH START SWITCH
(a) Check that there is continuity between terminals when the switch is ON (pushed).
(b) Check that there is no continuity between terminals when the switch is OFF (free).
If continuity is not as specified, replace the switch.