Pickup 2WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1987)
Reverse Idler Gear: Customer Interest
M/T - Reverse Idler Gear Modifications
TRANSMISSION
REFERENCE AND CLUTCH
NUMBER 015
DATE
10-03-86
MODEL RN5#, 6#, 7#, MX73
To eliminate gear clash while shifting into reverse, the following changes have been made:
FIGURE 1 - IDLER GEAR
1)
An increase in reverse idler gear shifting stroke resulting in a .098" (2.5 mm) increase in gear contact width.
2)
An increase in the width of the reverse idler gear from .630" (16 mm) to .689" (17.5 mm) as well as other dimensional changes shown below.
NOTE:
Proper clutch system operation and adjustment is important to ensure the effectiveness of this gear.
PRODUCTION EFFECTIVE:
Starting transmission No.: W51215127 (December 1985)
Starting VIN:
Description: Production Date:
JT4RN50R*G0142634
Standard bed
December 1985
JT4RN5#**G0191310
Long bed
December 1985
JT4RN5#**G7004311
Long bed
December 1985
JT4RN63S*G0022509
Standard bed, SR5, Non turbo
December 1985
JT4RN63S*G5009067
Standard bed, SR5, Non turbo
December 1985
JT4RN6#**G0012003
SR5, Non turbo
December 1985
JT4RN6#**G5010544
SR5, Non turbo
December 1985
JT4RN70D*G0010596
Xtracab, Long bed
December 1985
JT4RN75T*G0003811
Commercial cab chassis
December 1985
JT3RN64W*G0022509
SR5 4-Runner
December 1985
JT3RN64W*G5009067
SR5 4-Runner
December 1985
JT2MX73E*G0069926
Cressida Sedan
December 1985
JT2MX73E*G6002130
Cressida Sedan
December 1985