Pickup 2WD L4-2466cc DSL (1984)
FIGURE 5 - RADIATOR UPPER SUPPORT HOLE POSITION
Step 5
A.
Using Figure 5 as a guide, drill two 9 mm holes in the radiator upper support.
Note:
If holes already exist, this step is not necessary.
FIGURE 6 - RADIATOR LOWER SUPPORT AND FRONT CROSSMEMBER HOLE POSITION
B.
Using Figure 6 as a guide, drill two 9 mm holes in the radiator front crossmember.
Note:
If holes already exist, this stop is not necessary.
Figure 7
Step 6
Mount the oil cooler assembly (See Figure 7)