Pickup 4WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1986)
3. Apply MP grease to inner hub splines.
4. Install free wheeling hub cover with new gasket.
a. Set the control handle and clutch to the free position.
b. Place a new gasket in position on the cover.
c. Install the cover to the body with the follower pawl tabs aligned with the non-toothed portions of the body.
d. Tighten the cover mounting bolts.
Torque: 100 kg-cm (7 ft-lb, 10 Nm).
Operation Check
Note: Perform this check with two people.
Confirmation Of Forward Motion
1. Check lock operation.
a. Shift into "H4" and "1st" and slowly proceed for several meters.
b.
Stop the vehicle.